We sratred by doing a lab about how speed looks on a graph. We measured how far both a fast car and a slow car go every second for four seconds. When we graphed the data, the faster car had the steeper trend line. This is important because we know that the faster objects have the steeper trend lines.
We also learned about how to find either the speed, position, or time if we have the other two. To find the speed, we would use the formula x/t= s. To find the position we would use ts= x. To find the time we would use x/s= t. This is important because we can find the speed, time, or position.
Wednesday, November 4, 2009
Friday, October 30, 2009
Oct. 26-30
On monday, we got into a dicussion about whether or not objects can stop without slowing down. For homework, we watched a video, and it showed bullets in slow motion hitting a piece of bullet proof metal. With the slow motion, we were able to see that the bullet did slow down before coming to a complete stop. The front of the bullet would get smooshed when it hit the surface, and while it was getting smooshed, it slowed down. This shows that objects do slow down before they stop. This would be good to know if you were driving a car because you would know to slow down down before you reach a stop sign.
We were also looking at how different motions look on a graph with time on the x-axis and position on the y-axis. If something was a constant speed, the trend line would be straight. If the speed was increasing, the line would be curving, and it would become more vertical. If the speed was decreasing, the linewould also be curved, but it would be getting more horizontal. The graph could also show objects going in a negative direction/postion (backwards). Those graphs would have the trend lines going down. Knowing about the types of graphs is important because we use them to show the motions of the objects.
We were also looking at how different motions look on a graph with time on the x-axis and position on the y-axis. If something was a constant speed, the trend line would be straight. If the speed was increasing, the line would be curving, and it would become more vertical. If the speed was decreasing, the linewould also be curved, but it would be getting more horizontal. The graph could also show objects going in a negative direction/postion (backwards). Those graphs would have the trend lines going down. Knowing about the types of graphs is important because we use them to show the motions of the objects.
On Friday, we played around with some motion sensor kind of thing that sent out waves and made a graph of it. When the line increased, it meant that we were getting farther away, and when it decreased it meant that we were getting closer. Once we understood how it worked, we tried to make graphs that looked a certain way. This is important because now we know how to get away from Batzilla.
Sunday, October 25, 2009
Oct. 19- 23
On Monday we started the new unit. It has to do with movement. We made some little tube kind of things out of paper and had to look at a ball through it. We knew when the ball was moving because we had to change the orientation of the tube, and because the ball would appear to et bigger or smaller. If we don't have to change the orientation of the tube to see the object, we don't see it as moving. An unmoving observer who was still would see a still object as unmoving. A moving observer might see a moving object as unmoving, but they would have to be moving in the same direction at the same speed. Different observers see motion differently. This is important because we are always seeing objects move or not move.
On Tuesday, we dissected cow eyes. The outsides were covered in skin and fat, and they were really hard to cut. First, we had to cut the cornea so that the realy disgusting liquids inside the eye could come out. Then we had the cut the cornea out of the eye. After that we cut the eye in half. The lens came out of the eye, and it felt really hard like a marble. This i important because now we know some of the parts of the eye, and we also know that cow eyes are disgusting and hard to cut open.
When there is movement, time has to pass. That is why we cannot tell in pictures if something is moving. We should specify direction when e are talking about motion. Our lefts and rights can be different from someone else's depending on which direction we are facing, but North, South, East, and West are the same for everyone. This is important because people can see the direction of motion differently.
Sunday, October 18, 2009
Oct. 12-16
I think we started the week by learning about light and how we see colors. We had to answer the question "What occurs when light hits a surface?" The correct answer is that it sometimes reflects, sometimes refracts, and sometimes it is absorbed. We started talking about color, and said that white light is all colors, while black is none. Ex. of how we see colors: White light hits a green object, and the green light is reflected off while the other colors are absorbed. The color that the object is gets reflected off, so we see that color, and all the other colors are absorbed into the object. This is very important because colors are used every day, and it is important that we see them.
For homework, we each had to make a rubric to score ray diagrams, and the next day we used them to rate ray diagrams that people made. The highest number of points I had for each category was 3. For the first one, I gave it 0 for the direction of arrows because it didn't have and arrow points, 3 for neatness, and 2 for accuracy because it should have shown more rays. The second I gave perfect. The third I gave 2 for direction of arrows because the arrows were all going in the same direction, I gave it 3 for neatness, and I gave it 2 for accuracy because the rays were not going everywhere they were supposed to. For the fourth, I gave it 0 because the rays had no arrow points, 2 because it was somewhat messy, and 1 because the rays were curvy. We decided that all ray/wave diagrams should: have the waves be perpendicular to rays; have spacing of waves equal to speed; have arrow points on rays; have rays and waves show the direction; have objects labeled; have waves and rays following the law of reflection; and have waves refracting correctly. This is important because we would most likely get points taken off our tests or quizzes if our ray or wave diagrams are not correct.
Then for homework we watched a short video about a high density slinky and a low density slinky connected that had a wave go through it. My hypothesis before I watched it was that if a wave travels from the high d slinky to the low d slinky, then the wave should start slow and small then get bigger and faster when it gets to the less dense section, and vice versa. That is exactly what happened. The waves through a slinky is like waves going through different mediums with different densities. This is important because waves react differently when they go through different densities.
Then, another time, we stared talking about how we could not see all types of waves. The only type we can see is visible light. Other types of waves are ultra violet, infrared, microwaves, x-rays, and gamma rays. These are important because we use these waves daily. Visible light is used to see, microwaves are used in a microwave, infrared rays are use in a tv remote, and x-rays are used in x-rays at the hospital.
Then we stared talking about prisms. We don't see a rainbow when we shine a laser in the prism because that light is only red. But when we shine white light we can see a rainbow because the colors refract at different angles, and they separate. we also learned that light can reflect inside too, so when we shone the laser at the prism, it went everywhere.
On Friday, my class had to take the unit test on light.
Sunday, October 11, 2009
Oct. 5-9
This week we continued learning about refraction, and we also learned about two models for light. One model says that light is particles, and the other says that light is waves. The waves theory was from Huygen, it says that waves go through 'luminiferous ether', it is like ripples in water, and it explains shadows well. Newton came up with the particles theory, it says that light is 'corpuscles', it is like bouncy balls off a wall, and it explains colors and rainbows. They could both explain reflection. It is important to understand both theories because certain theories could explain certain situations.
For homework one night, we watched a little clip and had to decide if it supported the theory of light refracting and the slope being less steep. After a lot of talking, we decided that waves represent refraction better. We also figured out that light waves a perpendicular to rays. The is also a line perpendicular to the surface of whatever the light is refracting through called the 'normal line'. When light refracts into a denser material, the light bends towards the normal line, and when it refracts into a less dense material, the light bends away from the normal line. This is important because now we can determine where the light will refract.
Sunday, October 4, 2009
Sept. 28- Oct. 2
On Monday, we finished the testing that we started on Friday. The experiment from Friday was the reflectivity test, and we shined the lasers on the objects we were testing and observed how well the laser was reflected. My prediction was that none of the objects would reflect as well as the mirror. The objects I tested were a notebook cover, water, the dry erase board, and a mirror. When I reflected the laser off the notebook cover, the dot on the cardboard was big and dull. When I tested the dry erase board, the dot was smaller and less dull than with the notebook. When we tried to test water, it didn't reflect, the laser just passed through it. The mirror had the smallest and brightest dot out of them all. The conclusions we made were these: surfaces did vary in reflectiveness; "shiny" surfaces are more reflective; light passes through and is reflected off of glass; light spreads out on rough surfaces; and white reflects more while black absorbs more.
The experiment we had to finish on Monday had to do with light rays from the laser all going in the same direction and staying like that when they reflected off the mirror. The test was this: shine the laser at a mirror and clap erasers so that we could see the beam. My prediction was that the laser beams will be reflected in a straight line, and we would be able to see it with the erasers. When we did the test we observed that the beam looked like it did when we just shined it normally. Our conclusion was that the beams do go in a straight line when it hits the mirror.
After we discussed that experiment, we started talking about the angles at which the laser hits and reflects off of the mirror. The hypothesis was that the angle at which the laser hits the mirror will be the same as the angle at which the laser bounces off the mirror. The test was that we would hold up a clear plastic protractor vertical on the mirror and shine the laser through it at the measurements we were testing. The laser bounced back through the protractor and we could see what angle the laser was at. The IV was the angle at which the laser hit the mirror, or the angle of incidence, and the DV was the angle at which the laser reflects off the mirror, or the angle of reflection.
One night for homework, we had to make an analogy about light. Mine were these:Laser is to mirror as bouncy ball is the wall, and light is to wall as lots of really tiny bouncy balls are to wall. Then we started talking about the particle model of light. The model says that light rays are actually particles. So far, we've figured out that the particles are really fast, they scatter on rough surfaces, the particles travel in a straight line, and the light particle are called photons. We also started talking about the photons and water, but I don't really get yet, so I'll write about next week when I understand it better.
Monday, September 28, 2009
Sept. 21-25
On Monday, we finished the discussion about rays and one particular point on the light bulb. One hypothesis was that there is one ray on the point, and it just goes in some random direction. Another was that there are a million rays, and the direction they go in is only to a certain degree. The last hypothesis was that there are infinite rays and they go in all directions. I agrred with the last hypothesis. My H-D statement is this: If the rays are infinite and go in all directions, and we put a piece of cardboard with a hole over it, then there should not be any particular area of light that is brighter. We did the experiment , and my prediction matched the actual outcome, so that means that light goes everywhere and the last hypothesis was true. This is important because it will help us understand the other concepts.
At the end of class on Monday,we saw a piece of cardboard with a hole held next to a lit candle. There was a light from the flame on the wall, but it was upside down. (We were able to tell because of the flickering.) For homework, we had to try to come up with hypotheses to explain this. We went over them the next day, and after disproving almost all of them, we were left with one: the light from the bottom went through the hole, but only some of the rays could go through, and they went up on a diagonal, and ended up higher on the wall/object; in the middle, the light could just go straight through the whole, and ended up in the middle on the wall; at the top of the flame, the light had to go diagonal down to get to the hole, and kept going in a diagonal until it got to the wall, where it ended up below the hole. That night for homework, using this new knowledge, we had to explain how a camera worked. This is useful because now we understand how things like a camera and an eye work.
On Wednesday, we started doing some stuff with mirrors and lasers. My hypothesis from before we stared playing with the mirrors and lasers is that the light from the laser will reflect off the mirror. (I know it's not very detailed.) What happened was the laser did reflect off the mirror, but not like it reflects off the wall and other objects. Also, the dot on the mirror was not as bright to everyone as the dot on the wall. The hypotheses that we came up with to explain this were these: 1). The light from the laser is going in a very specific direction, unlike other lights, and when it reflects off the mirror, the rays continues to go in a straight line, and not just anywhere. And if it goes in a specific direction, it does mean it goes directly into your eye like other laser light rays that reflect off the wall and go everywhere. 2). Certain surfaces have different levels of reflectivity, and some will scatter the laser rays more than others. (End of hypotheses.) For homework, and also on Thursday, we designed experiments to test these. The test for reflectiveness was this: Shine a laser on the object being tested and see if it will reflect a dot onto a piece of cardboard. Then we compare the dots that were reflected onto the cardboard from all the objects and judge which were brighter, ect. We also had an experiment for the 'rays off the mirror in one general direction' hypothesis, but I forgot to write it down, and I can't remember it. We did the experiments on Friday. I only got to do the reflectiveness experiment. We're getting a little time to finish up the experiments on Tuesday (NO SCHOOL ON MONDAY!!!!! =D), so I'll just go over both experiments next week. This topic of mirrors and lasers may be useful if you need to reflect a laser around corners or in another direction.
Subscribe to:
Posts (Atom)
