Monday, December 21, 2009

Dec. 14-18

This week, we kept learning about force. A lot of it was from that giant kinematics and dynamics thing on the computer. We made some tables and graphs and somehow found out that acceleration = force / mass. We aso found out that if there are equal forces, the acceleration is 0.

We also learned about Newton's third law, which states that every force causes the same force on another object in a different direction. We learned that by going on carts and pushing people who were also on cartts. This is useful because now we know not to push or pull anything while on roller skates or carts.

Lastly, we learned that everything falls with the same acceleration of 10 N. For example, the earth would pull something that was 1 kg with 10N. 10/ 1= 10. It is always 10 n/kg or 9.8 m/s sq.

Sunday, December 13, 2009

Dec. 7-11

This week, we continued to learn about force. We were given problems for homework, and in class we would discuss it. One of the problems was that an elevator had a negative amount of force pushing down on it, and we had to explain whether it was speeding up or slowing down. It turns out that it can be either because total force actually represents acceleration. If the elevator was going up, it would be slowing down, and if it was going down, it would be speeding up. The unbalanced forces in a forc e diagram are like the delta v arrow in a motion diagram. If it isn't moving and the forces cancel out, it isn't moving. if it is moving and the forces cancel out, it isn't accelerating. If an object is moving horizontally, and not vertically, and the vertical forces cancel out, it is not moving vertically, and vice versa.

We also learned from pushing people on carts that mass also affects acceleration. when there was only one person on the cart, the acceleration was greater than when there were 2 or 3 people on the cart. The two hypotheses that we had were that as mass increases, acceleration decreases, and when m decreases, a increases. The other hypothesis was that as m increases, a increases, and as m decreases, a decreases. They are both right. The first hypothesis is correct if the force each time is the same, like someone pushing. The other is true if the amount of force on the object depends on the mass, like the force of the earth. If the mass is greater, the force is greater, making it accelerate faster.

This would be useful if you are racing someone on a cart because you would want less mass on your cart so that there would be greater acceleration. And if you are jumping off something and seeing who gets to the bottom first, the heavier person is gonna get there first.

Sunday, December 6, 2009

Nov. 30- Dec. 4

Tuesday was the kinematics test, and on Monday we did a scavenger hunt review thing. Then, on Wednesday, we started the new unit on dynamics. A person held a basketball out in one hand and a bowling ball in the other. The two forces acting upon each ball is the force of the earth (like gravity) and the force of the person's hand. We decided that if the two were equal, the object wouldn't move, and if they weren't equal, it would be moving. For example, if the for of the earth was greater than the force of the hand, then the ball would be getting lower, and if the force of the hand was greater, the ball would be getting higher.
Then we started using force diagrams to model things instead of always having to draw pictures. In the diagram, the object the force was being exerted upon is represented by a dot, and the dot is labeled for what it is. We had arrows coming off of them from the top and bottom and side to side to represent force. Those were labeled for what the force came from and how much force in Newtons it was. The arrows opposite each other have opposite signs, so one arrow would say -__N while the other said +__N. Arrows could be stacked if there are two different forces, such as two people holding something. A number sentence for force would look like __N+__N=__N. If the total force is equal to zero, then the object isn't moving. Other objects could also be pushing and object. For example, a table would be pushing up on the ball while the earth is pushing it down.

We learned this stuff by holding bowling balls and pushing cars. This is useful because now we can figure out how much the push up or down or left or right on an object to get it to move a certain way.

Sunday, November 22, 2009

Nov. 16-20

This week, we continued learning about kinematics. Most of the stuff we've been doing is from the kinematics module workbook kind of thing. We started learning about acceleration. We learned that even though the velocity may not be constant, the rate of acceleration can. Acceleration is represented by the slope in a time/ velocity graph. We also di the lesson before that. These are helpful because we can find the positions, times, velocities, and accelerations of more situations.

Wednesday, November 4, 2009

Nov. 2-4

We sratred by doing a lab about how speed looks on a graph. We measured how far both a fast car and a slow car go every second for four seconds. When we graphed the data, the faster car had the steeper trend line. This is important because we know that the faster objects have the steeper trend lines.

We also learned about how to find either the speed, position, or time if we have the other two. To find the speed, we would use the formula x/t= s. To find the position we would use ts= x. To find the time we would use x/s= t. This is important because we can find the speed, time, or position.

Friday, October 30, 2009

Oct. 26-30

On monday, we got into a dicussion about whether or not objects can stop without slowing down. For homework, we watched a video, and it showed bullets in slow motion hitting a piece of bullet proof metal. With the slow motion, we were able to see that the bullet did slow down before coming to a complete stop. The front of the bullet would get smooshed when it hit the surface, and while it was getting smooshed, it slowed down. This shows that objects do slow down before they stop. This would be good to know if you were driving a car because you would know to slow down down before you reach a stop sign.

We were also looking at how different motions look on a graph with time on the x-axis and position on the y-axis. If something was a constant speed, the trend line would be straight. If the speed was increasing, the line would be curving, and it would become more vertical. If the speed was decreasing, the linewould also be curved, but it would be getting more horizontal. The graph could also show objects going in a negative direction/postion (backwards). Those graphs would have the trend lines going down. Knowing about the types of graphs is important because we use them to show the motions of the objects.

On Friday, we played around with some motion sensor kind of thing that sent out waves and made a graph of it. When the line increased, it meant that we were getting farther away, and when it decreased it meant that we were getting closer. Once we understood how it worked, we tried to make graphs that looked a certain way. This is important because now we know how to get away from Batzilla.

Sunday, October 25, 2009

Oct. 19- 23

On Monday we started the new unit. It has to do with movement. We made some little tube kind of things out of paper and had to look at a ball through it. We knew when the ball was moving because we had to change the orientation of the tube, and because the ball would appear to et bigger or smaller. If we don't have to change the orientation of the tube to see the object, we don't see it as moving. An unmoving observer who was still would see a still object as unmoving. A moving observer might see a moving object as unmoving, but they would have to be moving in the same direction at the same speed. Different observers see motion differently. This is important because we are always seeing objects move or not move.

On Tuesday, we dissected cow eyes. The outsides were covered in skin and fat, and they were really hard to cut. First, we had to cut the cornea so that the realy disgusting liquids inside the eye could come out. Then we had the cut the cornea out of the eye. After that we cut the eye in half. The lens came out of the eye, and it felt really hard like a marble. This i important because now we know some of the parts of the eye, and we also know that cow eyes are disgusting and hard to cut open.

When there is movement, time has to pass. That is why we cannot tell in pictures if something is moving. We should specify direction when e are talking about motion. Our lefts and rights can be different from someone else's depending on which direction we are facing, but North, South, East, and West are the same for everyone. This is important because people can see the direction of motion differently.

Sunday, October 18, 2009

Oct. 12-16

I think we started the week by learning about light and how we see colors. We had to answer the question "What occurs when light hits a surface?" The correct answer is that it sometimes reflects, sometimes refracts, and sometimes it is absorbed. We started talking about color, and said that white light is all colors, while black is none. Ex. of how we see colors: White light hits a green object, and the green light is reflected off while the other colors are absorbed. The color that the object is gets reflected off, so we see that color, and all the other colors are absorbed into the object. This is very important because colors are used every day, and it is important that we see them.

For homework, we each had to make a rubric to score ray diagrams, and the next day we used them to rate ray diagrams that people made. The highest number of points I had for each category was 3. For the first one, I gave it 0 for the direction of arrows because it didn't have and arrow points, 3 for neatness, and 2 for accuracy because it should have shown more rays. The second I gave perfect. The third I gave 2 for direction of arrows because the arrows were all going in the same direction, I gave it 3 for neatness, and I gave it 2 for accuracy because the rays were not going everywhere they were supposed to. For the fourth, I gave it 0 because the rays had no arrow points, 2 because it was somewhat messy, and 1 because the rays were curvy. We decided that all ray/wave diagrams should: have the waves be perpendicular to rays; have spacing of waves equal to speed; have arrow points on rays; have rays and waves show the direction; have objects labeled; have waves and rays following the law of reflection; and have waves refracting correctly. This is important because we would most likely get points taken off our tests or quizzes if our ray or wave diagrams are not correct.

Then for homework we watched a short video about a high density slinky and a low density slinky connected that had a wave go through it. My hypothesis before I watched it was that if a wave travels from the high d slinky to the low d slinky, then the wave should start slow and small then get bigger and faster when it gets to the less dense section, and vice versa. That is exactly what happened. The waves through a slinky is like waves going through different mediums with different densities. This is important because waves react differently when they go through different densities.

Then, another time, we stared talking about how we could not see all types of waves. The only type we can see is visible light. Other types of waves are ultra violet, infrared, microwaves, x-rays, and gamma rays. These are important because we use these waves daily. Visible light is used to see, microwaves are used in a microwave, infrared rays are use in a tv remote, and x-rays are used in x-rays at the hospital.

Then we stared talking about prisms. We don't see a rainbow when we shine a laser in the prism because that light is only red. But when we shine white light we can see a rainbow because the colors refract at different angles, and they separate. we also learned that light can reflect inside too, so when we shone the laser at the prism, it went everywhere.

On Friday, my class had to take the unit test on light.

Sunday, October 11, 2009

Oct. 5-9

This week we continued learning about refraction, and we also learned about two models for light. One model says that light is particles, and the other says that light is waves. The waves theory was from Huygen, it says that waves go through 'luminiferous ether', it is like ripples in water, and it explains shadows well. Newton came up with the particles theory, it says that light is 'corpuscles', it is like bouncy balls off a wall, and it explains colors and rainbows. They could both explain reflection. It is important to understand both theories because certain theories could explain certain situations.

For homework one night, we watched a little clip and had to decide if it supported the theory of light refracting and the slope being less steep. After a lot of talking, we decided that waves represent refraction better. We also figured out that light waves a perpendicular to rays. The is also a line perpendicular to the surface of whatever the light is refracting through called the 'normal line'. When light refracts into a denser material, the light bends towards the normal line, and when it refracts into a less dense material, the light bends away from the normal line. This is important because now we can determine where the light will refract.

Sunday, October 4, 2009

Sept. 28- Oct. 2

On Monday, we finished the testing that we started on Friday. The experiment from Friday was the reflectivity test, and we shined the lasers on the objects we were testing and observed how well the laser was reflected. My prediction was that none of the objects would reflect as well as the mirror. The objects I tested were a notebook cover, water, the dry erase board, and a mirror. When I reflected the laser off the notebook cover, the dot on the cardboard was big and dull. When I tested the dry erase board, the dot was smaller and less dull than with the notebook. When we tried to test water, it didn't reflect, the laser just passed through it. The mirror had the smallest and brightest dot out of them all. The conclusions we made were these: surfaces did vary in reflectiveness; "shiny" surfaces are more reflective; light passes through and is reflected off of glass; light spreads out on rough surfaces; and white reflects more while black absorbs more.

The experiment we had to finish on Monday had to do with light rays from the laser all going in the same direction and staying like that when they reflected off the mirror. The test was this: shine the laser at a mirror and clap erasers so that we could see the beam. My prediction was that the laser beams will be reflected in a straight line, and we would be able to see it with the erasers. When we did the test we observed that the beam looked like it did when we just shined it normally. Our conclusion was that the beams do go in a straight line when it hits the mirror.

After we discussed that experiment, we started talking about the angles at which the laser hits and reflects off of the mirror. The hypothesis was that the angle at which the laser hits the mirror will be the same as the angle at which the laser bounces off the mirror. The test was that we would hold up a clear plastic protractor vertical on the mirror and shine the laser through it at the measurements we were testing. The laser bounced back through the protractor and we could see what angle the laser was at. The IV was the angle at which the laser hit the mirror, or the angle of incidence, and the DV was the angle at which the laser reflects off the mirror, or the angle of reflection.

One night for homework, we had to make an analogy about light. Mine were these:Laser is to mirror as bouncy ball is the wall, and light is to wall as lots of really tiny bouncy balls are to wall. Then we started talking about the particle model of light. The model says that light rays are actually particles. So far, we've figured out that the particles are really fast, they scatter on rough surfaces, the particles travel in a straight line, and the light particle are called photons. We also started talking about the photons and water, but I don't really get yet, so I'll write about next week when I understand it better.

Monday, September 28, 2009

Sept. 21-25

On Monday, we finished the discussion about rays and one particular point on the light bulb. One hypothesis was that there is one ray on the point, and it just goes in some random direction. Another was that there are a million rays, and the direction they go in is only to a certain degree. The last hypothesis was that there are infinite rays and they go in all directions. I agrred with the last hypothesis. My H-D statement is this: If the rays are infinite and go in all directions, and we put a piece of cardboard with a hole over it, then there should not be any particular area of light that is brighter. We did the experiment , and my prediction matched the actual outcome, so that means that light goes everywhere and the last hypothesis was true. This is important because it will help us understand the other concepts.

At the end of class on Monday,we saw a piece of cardboard with a hole held next to a lit candle. There was a light from the flame on the wall, but it was upside down. (We were able to tell because of the flickering.) For homework, we had to try to come up with hypotheses to explain this. We went over them the next day, and after disproving almost all of them, we were left with one: the light from the bottom went through the hole, but only some of the rays could go through, and they went up on a diagonal, and ended up higher on the wall/object; in the middle, the light could just go straight through the whole, and ended up in the middle on the wall; at the top of the flame, the light had to go diagonal down to get to the hole, and kept going in a diagonal until it got to the wall, where it ended up below the hole. That night for homework, using this new knowledge, we had to explain how a camera worked. This is useful because now we understand how things like a camera and an eye work.

On Wednesday, we started doing some stuff with mirrors and lasers. My hypothesis from before we stared playing with the mirrors and lasers is that the light from the laser will reflect off the mirror. (I know it's not very detailed.) What happened was the laser did reflect off the mirror, but not like it reflects off the wall and other objects. Also, the dot on the mirror was not as bright to everyone as the dot on the wall. The hypotheses that we came up with to explain this were these: 1). The light from the laser is going in a very specific direction, unlike other lights, and when it reflects off the mirror, the rays continues to go in a straight line, and not just anywhere. And if it goes in a specific direction, it does mean it goes directly into your eye like other laser light rays that reflect off the wall and go everywhere. 2). Certain surfaces have different levels of reflectivity, and some will scatter the laser rays more than others. (End of hypotheses.) For homework, and also on Thursday, we designed experiments to test these. The test for reflectiveness was this: Shine a laser on the object being tested and see if it will reflect a dot onto a piece of cardboard. Then we compare the dots that were reflected onto the cardboard from all the objects and judge which were brighter, ect. We also had an experiment for the 'rays off the mirror in one general direction' hypothesis, but I forgot to write it down, and I can't remember it. We did the experiments on Friday. I only got to do the reflectiveness experiment. We're getting a little time to finish up the experiments on Tuesday (NO SCHOOL ON MONDAY!!!!! =D), so I'll just go over both experiments next week. This topic of mirrors and lasers may be useful if you need to reflect a laser around corners or in another direction.

Sunday, September 20, 2009

Science: Sept. 14-18

This week, we started learning about light.  On monday we were just finishing up with the nature of science stuff (I think), and we started Tuesday by brainstorming thing we know about light.  There were two different hypotheses that we came up with.  They were:  (A)"If we were in a room with no light, we would not be able to see anything," and (B)"If there were no light, our eyes would adjust after a while."  I agreed with the first one.  We set up a test in which we would go under a desk, where there was no light, and see if we could read a sign.  We tested that on Wednesday, and these are my observations:  I could not see/ read anything.  So the conclusion hat we came up with is that you cannot see if there is no light.  The first hypothesis was correct.  This is good to know because it will be easier to understand the rest of what we do with light,  and we will know not to go anywhere with absolutely no light because we will not be able to see.   

On Tuesday, we also talked about the laser pointers.  All that we saw when we pushed the button was the light on the wall.  So, we all made hypotheses about how the dot got there.  I'm pretty sure that most people knew that it followed a path that went straight out to the wall.  My hypothesis was that there was an invisible path that went in a straight line, and the light only showed up on solid objects.  The test was that we would we would try to see the path by shining the laser through flour and other stuff.  I tried shining it through flour, water, and glass.  My observations: I could see the path through the flour, I could see where it passed through the glass, and I could see the path through water droplets splattering out of the sink.  My conclusion is that there is a path and you could see it through flour, water. and glass.  My H-D statement:  If the laser pointer does have a straight path to the dot, and we shine it through flour, glass, and water, then we should be able to see the path.  And my prediction matched my observations.  Other than helping us understand the rest of the light stuff, I think this would help if we were trying to break into a place that had the invisible laser path security things.

On Thursday and Friday, we discussed light reflecting off of objects.  We took a few minutes to do some experimenting with light bulbs and we made pictures.  My picture is of a light bulb with arrows coming off it in all directions.  The arrows represent beams or rays of light.  Some of the rays went off in all random directions, and a few hit a pencil.  Then I had some rays coming off the pencil in the area that the pencil had arrows going to it.  (Maybe if I'm bored, I'll make a picture and put it on here. Maybe.)  My notes I made on that were this: some beams bounce off the pencil and some continue to other places; the pencil blocks some of the beams and they don't go past it; beams reflect off objects.  I guess this let's people know stuff, like go in shade to stay cool because the sun's rays are being blocked and can't reach the shade.  I would kinda hope that people already know this.

Then we discussed how we see.  We had some hypotheses on the board that we would disprove.  My hypothesis/ picture thing was this:  A light bulb with beams going in all directions; some beams hit a marker and are reflected off that in all directions; some of those beams go into the peoples' eye; the image goes to the brain and the person sees the marker.  this hypothesis was right. This is an important idea because we are always seeing things but not thinking about it, and now we know how/why. 

We also began to discuss something else.  We had a picture of a light bulb, and three different things drawn on there.  Picture A had a speck on the bulb with a single ray.  Picture B was supposed to have a million rays, spanning out a little, but not so much.  Picture C was supposed to have infinite rays going in all directions, and some of the rays reflecting off a solid object and not getting past it.  I like picture C.  I don't think we finished talking about that, so there's nothing else I can say about it.  
  

Monday, June 8, 2009

Jun 1-5

On Monday we had a study hall.  Then, on Tuesday we read something on the computar and did some activities.  We went over that in class on Wednesday, and also did some experiments.  One was a glass tube thing filled with a little water with a cork on be heated over the bunsen burner. The cork shot off of it.  The other was a little water in a water bottle with smoke in it that made a cloud.  We discussed these experiments on Thursday.  On Friday, most people weren't in school because of a trip to Dorney Park, so we just melted and bent some glass tubes in the bunsen burners.

Monday, June 1, 2009

May 25-29

Monday was Memorial Day, so we didn't have school. On tuesday, we swithed the groups. I went to documentary. The website is called "Becoming Human", and it just had some videos and exhibits all about hominids and the ancient human/monkey common ancestor. We also did this on Wednesday.

I think that on Thursday we went over the answers for the classification homework from when we were in the classification group. This may have been on Friday because I usually mix up days, but I think it was Thursday. This is pretty much what we learned for the homework:

Carplus Lineaus was a Swedish botanist and physician. He attempted to give every known species a 2-part Latin name. Binomial nomenclature is the system he created. This is used to give each species a name. The first part of the name is the genus, and the second part is the species.

7 classifactions from largest to smallest: kingdom, phylum, class, order, family, genus, species (King Philip Came Over For Good Spagetti)

What kingdom, phylum, class... do you belong: animalia, chordata, mammalia, primate, hominidae, homo, sapien

Human scientific name: Homo sapien

On Friday, we learned about the food chain. The food chain is the flow of energy through an organism. A food web is the flow of energy through a community. These are the symbiotic relationships: Parasitic is when the organism is gaining but the host is losing. Mutualistic is when both host and organism are gaining. Commensalistic is when the host is unaffected and the organism is gaining.

That is what we did this week.

Monday, May 25, 2009

May 18-22

Lamark was one of the people who had a theory about evolution.  They are called the Lamarkian Theory of use and disuse and the Theory of the inheritance of acquired characteristics.  The theory of use and disuse is this: if you were to work at something, you can actually change a trait.  Also, if you don't use something, you will lose it.  This is the theory of inheritance of the acquired characteristics: The above traits will be passed down if both parents have the traits.  Neither of these theories are actually true.

We also started learning about the common ancestor for humans and monkeys.  The oldest one found was Lucy, found in Ethiopia and about 3-4 million years old.  Hominid is a class that includes humans, monkeys, and those ancestors.  The early hominids were the common ancestors for humans and monkeys.  They stand on to feet, and are omnivorous mammal primates.  

The split into 2 groups.  One watched some documentaries on the computer, and some, like me, did some work about classifications. 

Monday, May 18, 2009

Science Class- May 11-15

This week we learned about population, how iguanas on the Galapogas Islands adapted, and different ways for organisms to adapt.

Population-
Population is dynamic (ever changing), not static (never changing). Population is controled by predators and resources. Maximum capacity limit is the limit that an environment can support a population in terms of resources. Fringe speces is a species that lives in open fields around forest.

Iguanas-
We first looked at the regular green iguana, and looked for adaptations that it might have. Then we did the same thing with the yellow and the red iguanas from the Galapogas Islands. They had homologous structures, or similar structures. Therefore they must come from common ancestors and they both adapted into new species.

Processes of evolution-
-mutation: a random change in DNA
-Natural selection: a change in response to the environment
-selective breeding: forced breeding to get desired traits
-genetic engineering: forced change in DNA
-gene flow
-genetic drift

Sunday, May 10, 2009

Science Class- May 4- 8

This week, we learned about adaptations.  First we took notes, and then we did some simulations.

Processes that cause adaptations are environmental changes, evolution and mutations in the DNA.  It also may be caused by selective breeding and genetic engineering.  

If the organism is best suited for the environment, it will survive and reproduce.  If the organism is not suited for the environment, it will die off and not reproduce.  This way, the negative trait won't be passed down.  Negative traits still might occur if it is recessive and the parents are heterozygous, or there is a mutation.  Changes occur gradually across a population.  If the environment changes too quickly, the organism may not be able to adapt in time and it might die out.  

Starburst Alien Simulation
In this simulation, the background color represented the environment and the aliens that were the same color were best suited for it.  There are two things that might happen when you change the color: 1) the aliens may not adapt quick enough and the will all die, or 2) the aliens in the population will adapt and most of them will end up with that color.

Guppy Simulation
In this simulation, you choose the predators in the environment and then the starting population (% of types of guppies).  Over time, you watch as the types of guppies in the population increase or decrease in response to the environment.  

Peppered Moths
In this simulation, you are a bird, and trying to find the moths on the trees.  There are two types of moths: light and dark, and two kinds of trees: light and dark.  When the trees are light, it is hard to see the light moths and the light population increases. When the trees are dark, it is harder to find the dark moths and the population for them increases.  

Monday, April 27, 2009

Science Class- Apr. 20-25

This week, we worked on our cockroach experiments. My group tested what materials they can stick to. We noticed that they stuck to the plastick cups and our hands, so we wanted to know what else they would stick to.

IV: (material being tested) wood, glass, cloth, paper, computor screen, dry erase board
DV: whether the cockroaches stuck or not
CV: we used 2 normal, healthy adult cockroaches for accuracy, we made sure that they stuck for at least 30 sec., and we had all materials set at a 90 degree angle

Procedure:
1. set up or find materials at a 90 degree angle
2. get 2 cups and label A and B
3. place 1 adult cockroach in each cup
4. get timer ready
5. get data table ready
6. place something soft below material being tested
7. place roach A on material being tested and start timer
8. after 30 sec., or when it falls, put the cockroach back in the cup
9. record in data table whether the roach stuck or not
10. repeat steps 7-9 with roach B
11. repeat steps 4-10 with each material

Hypothesis:
I thought that they would stick to everything except for the dry erase board and the computor screen, or the materials with more texture.

Results: (roaches had the same results)
Wood- they stuck
Glass- they stuck
Cloth- they stuck
Paper- they stuck
Computor screen- they stuck
Dry erase board- they didn't stick

Conclusion:
They were able to stick to everything except dry erase board. Therefore, I think they can stick to almost every material.

Wednesday, April 8, 2009

What I learned this week

- In a bog, the water may look only a few inches deep, but it could actually be really deep.

- Birch beer is made from birch trees.

- When building a shelter, it is best for it to stay close to the ground so that it will stay warmer.

- There are some really nasty bugs and things in ponds and streams.

- Compasses could be thrown off by various metal or magnetic objects.

Sunday, April 5, 2009

Science Class-Mar 3o-Apr 3

This week, we started by finishing with our science project.  There isn't a lot to discuss about that.  We also had a test.  There isn't a lot to discuss about this, either.  Before we took the test on Thursday, we started a new unit.  We started this on Wednesday.  

The first thing we did when we started the unit was discuss observations:
+we use our senses to observe things
+what we notice happen
+can be qualitative or quantitative
+qualitative- description
+quantitative- numbers
+can be emotions or behaviors
+patterns, changes, trends
+can draw conclusions from it later
+used to answer questions and come up with more
+can be your opinion, but not frequently
+background variables- time, temp., date, ect.
+pictures- draw or from a camera, ect.
+macroscopic verses microscopic observations

Then, we observed cockroaches.  So far, I have observed that :
-they hiss
-can be big or small
-longish body
-brown
-feeler things on head
-shell
-have six legs
-hiss when they are being touched or held
-can be light or dark brown
-has white circles under feet (may have been used to stick)
-have small mouthes
-uses feelers for main sense (I think)
-looked like it was cleaning its foot (doing something with its mouth)

That is all that we did this week.

Monday, March 30, 2009

Science Class- Mar 23-26

This week, we have been working on a project. We made and bred bugs that are called reebops, and did some did some things for the project. The project was made up of some of these mini project things. These were like review for everything after the last test.

One part of the profect was an essay about meiosis and mitosis. We had to write an essay about meiosis and mitosis, and how the reebops used them. The parent reebops used the meiosis to make gametes and pass down half of their homologous pairs to the gametes. When the reebop was a zygote, it used mitosi to make more cells and grow bigger.

Another part was to make the gametes with the karyotypes inside of it. This was pretty easy, as long as you know which parent the gene came from. We also had to make the genes the color of whoever it came from.

The other part was making a lesson for how to make a Punnett Square on the smart notebook. That was mostly a review.

The other part was making a blog about how genetic variety played a role in the reebop family. If you mated with different people, you would have a bigger family, and chromosomes from more people.

We also made a wikispace page a bout a genetic disease. My disease was haemophilia. This affects the blood clotting factorin the X-chromosome. People with this disease have blood that cannot clot.

Saturday, March 28, 2009

Genetic Variety

For the genetic bug project, we had to breed with a lot of people. If the bug that you breed with is very different from your bug, your bug will most likely have an offspring who's phenotype is more different. On the other hand if the bug that you are breeding with is similar to yours, the offspring may look very similar to your bug. Most of my bugs looked pretty similar to the bugs I bred with. As a result, there were only 2-3 differences in the parent's and child's phenotype. There weren't a lot of big differences between the parents and children, but by the time I got to the f3 generation, the bug was very different from the first one.










The number of different people you breed with also affaects the bugs. If you keep breeding with the same people, there won't be a lot of variety. Your bug would have a very small family, because there wouldn't be genes from other people. Not only would the child only have genes from a few people, but it wouldn't be able to have very different traits. I bred with all different people, and now my last generation has genes from eight different people. Some of the traits I wouldn't have if I didn't breed with different people.

Sunday, March 15, 2009

Science Class- Mar. 9-13

This week, we learned about co dominance and incomplete dominance.  Incomplete dominance is when one allele is not completely dominant, so some of the recessive shows through.  An example of this is a red flower and a white flower having a pink flower.  Co dominance is when there are two equally dominant alleles.

Blood type is an example of co dominance.  Both A and B are dominant and o is recessive.  For blood type, they represent alleles with "I".  A is I with an A at the top, and B is an I with a B at the top.  O is just i.  The blood type A could be IA IA or IA i.  B could be IB IB or IB i.  AB would be IA IB.  O is i i.  Blood also has the Rh factor.  That means it can be positive or negative.  The + is dominant and the - is recessive.  

On Friday, we received traits for our make-believe bug selves.  We traced the bugs to make them look how they were supposed to.

We also learned how to make a dihybrid chart.  It shows the possible genotypes for two traits.  On the top and side are the possible allele combinations for the parents.  Here is an example for blood type with the Rh factor:

IA IB --,  IB i +-   Combinations: IA-, IB-, IA-, IB-;  IB+, i+, IB-, i- 




IA -


IB -


IA -


IB -

IB +

IA IB +-

IB IB +-

IA IB +-

IB IB +-

i +

IA i +-

IB i +-

IA i +-

IB i +-

IB -

IA IB --

IB IB --

IA IB --

IB IB --

i -

IA i --

IB i --

IA i --

IB i --


Sunday, March 8, 2009

Science Class- Mar 3-6

This week, we looked at some of the traits we have.  From a list of traits, we marked the traits we do and don't have.  We looked at the results from everyone and tried to figure out which were dominant or recessive based on the number of people that had it.  The traits are: tongue rolling (dominant), widow's peak (dominant), dimples (dominant), earlobe attachment (recessive), mid-digit hair (I think dominant), PTC taster (dominant), and cleft chin (recessive).  

If someone shows a dominant trait, you cannot tell if they are heterozygous because you only see the dominant trait.   You can probably tell by looking at the children or family members, but you can't tell from just looking at someone.  If someone shows a recessive trait, you know they are not heterozygous because both alleles would have to be recessive.  

We also did a lab that has to do with Punnett Squares and actual traits.  For the lab, we made up traits and whether they were dominant or not.  Then, in our groups, we made genotypes for the trait a set of parents.  We made Punnett Squares to predict  if the child would have the trait or not.  We had papers with alleles for the mom and dad that we put in a jar, and we picked an allele from each.  We made four genotypes for the kid's trait.  Most of the time, the traits we picked were different from on the Punnett Square.  The Punnett Square isn't always right about exactly what child would have which trait.  They just tell you the possible genotypes and the chances that the child would end up with it.

Sunday, March 1, 2009

Science Class- Feb 23-27

This week, we learned about heredity.  We started out doing some simulations about peas on the computer.  From the simulations, I learned that if the parents don't have a certain gene, the child won't have it.  Also, if a pea has one capital (dominant) gene and one lowercase (recessive) gene (out of two genes), the pea will display the dominant gene, but will still carry the recessive gene.  One simulation talked about Gregor Mendel, a Swiss monk who studied peas and how they passed down traits.  

As we went through and discussed the simulations as a class, I developed some more hypotheses.  They are:
1. capital letters are dominant genes; lowercase are recessive
2. the gene is always displayed if there are two of them- upper or lowercase
3. if there is one of each gene, each gene has an equal chance of being passed down, but the dominant gene is displayed
4. if neither parent has a certain gene, the children will not have it
5. if both parents total four of the same gene, all of the children will have two of the gene

After we learned more about the genes, we made Punnet Squares.  They use the homologous pairs, which are the two same letters (Yy, TT, rr, ect), of the parents to find out the possible homologous pairs for the children.  

When we got the hang of this, we learned some new vocabulary:
dominant- visible gene
recessive- hidden gene
heterozygous- different genes (Yy)
homozygous- same genes (YY,yy)
homozygous dominant- homo with dominant genes (YY)
homozygous recessive- homo with recessive genes (yy)
allele- alternate form of a gene (y,G,B,D,f,c)
genotype- description of the allele combination (genetic code) ex. Yy (for yellow color)
phenotype- individual's appearance (physical qualities) ex. yellow

Sunday, February 8, 2009

Science Class- Feb 2-6

This week, we learned about meiosis.  Meiosis is reproduction for the sex cells.  These cells are haploid, and only have 50% of their DNA.  The other cells with 100% of DNA are called diploid.  We started to learn what happens during the phases, and how it is similar and different from mitosis.

The parent cell starts by replicating the DNA.  The cell then goes through meiosis I, and ends up with two cells with the right amount of DNA.  In mitosis, the chromosomes turn back to DNA when it is over.  In meiosis, the chromosomes stay as chromosomes.  Right after that, without replicating DNA, those cells go to meiosis II.  The cells start with 100% DNA, and then they split in half and only have 50% DNA.

Phases of meiosis:

meiosis I

prophase I- nucleus starts to break down, homologous chromosomes connect and the homologues cross over, centrioles move to the poles of the cell  

metaphase I- homologues align next to metaphase plane next to each other, and a spindle fiber attaches to each homologue

anaphase I- homologues are separated and go to opposite poles  

telophase I- nuclei begin to form back and cells begin to separate

cells separate and meiosis II starts

prophase II- ( no DNA replication, and chromosomes are still chromosomes ) spindle fibers attach to centromeres and nucleus begins to fade   

metaphase II- chromosomes line up on the metaphase plane

anaphase II- chromatids separate and move to opposite poles

telophase II- cells start to pull apart and nucleus begins to form

The cells then separate and the chromosomes turn back to chromatin.  The new cells have 50% of the DNA.  

During the meiosis I, it is the homologues that are splitting.  In meiosis II, the chromosomes are splitting ( like in mitosis ). 


   

Monday, February 2, 2009

Science Class- Jan. 25-30

This week, we continued to learn about cell reproduction. This process is also called mitosis. We went over the simulation, and talked about chromosomes and centrosomes. We also went over the steps in mitosis.

There are 3 types of chromo- things that we learned about. Chromosomes are an easy-to-read DNA package. They come in pairs. There are 2 chromosomes in a pair. Chromotin are unwound chromosomes. Chromotids are the X-shaped chromosomes. The 2 chromosomes in a chromotid are joined together by the centromere. These are pulled apart during metaphase.

There are also 3 types of centro- things. Centrioles are organelles in the cells. Centrioles split in half, and become 2 centrioles. Those 2 are called centrosomes. During metaphase, the centrosomes make spindle fibers and attach to the centromeres. The centromeres hold the chromatids together. In metaphase, the centrosomes line up the chromatids in the middle. In anaphase, the centromeres let the chromatids split up, and the chromosomes are pulled to the poles by the spindle fibers.

Sunday, January 25, 2009

Science Class- Jan. 20-23

This week, there wasn't a lot that we did.  On Monday, we didn't have school, and on Tuesday I was watching the inauguration for most of the period, so we just asked questions about the test.  On Wednesday, we took the test, and on Thursday I think we discussed it a little bit.  On, Friday, we learned about mitosis at http://www.cellsalive.com/mitosis.htm.  

Mitosis is cell reproduction.  There are seven steps in mitosis.  They are interphase, prophase, prometaphase, metaphase, anaphase, telophase, and cytokinesis.  Interphase is when the DNA in the cell is being replicated.  Then, during prophase, the replicated DNA and proteins make the chromosomes.  The nucleus in the cell also starts to fade.  In prometaphase, the nucleus breaks down, and the spindle fibers get longer and attach to the chromosomes.  During metaphase, the spindle fibers cause the chromosomes to line up in the center of the cell.  Anaphase is when the spindle fibers get shorter, and the proteins on the chromosomes separate.  The chromatids, or replicated chromosomes, are pulled to opposite poles of the cell.  (The X shaped chromatids are split in half, and go to the poles.)  In telophase, the chromatids reach the poles, and the spindle fibers that are attached to the chromatids disappear.  Cytokinesis is when the spindle fibers that are not attached to chromatids start to break down, and form a section that separates the cell into two, and it forms two cells.  Then, both cells start interphase again, to prepare for more cell reproduction.

Tuesday, January 20, 2009

Science Class- Jan. 13-17

This week, we countinued to learn about protien synthesis, and we started to learn about cell reproduction. We also did a lab to learn about the cell reproduction.

On Monday and Tuesday, we acted out protein synthesis so that we could better understand the process. It starts with transcription in the necleus. Part of the DNA opens up, and that part is copied. That copy is the messanger RNA (mRNA). The mRNA then leaves the nucleus through the membrane, and goes to find a ribosome.
The next part is translation. The mRNA finds a ribosome either in the rough ER or cytoplasm. The ribosome reads one codon (group of 3 necleic bases) at a time. Then, the transfer RNA (tRNA) with the matching anti-codon comes. It attaches to an amino acid at the binding site, and they go to the ribosome. More tRNA come as more codon are read. The tRNA leave, and all of the amino acids make a chain. When the chain is complete, it crumples up and is a protein.

On Wednesday, we took notes on cell reproduction. Then, on Thursday and Friday, we did a lab. We looked at the tip of an onion root under the microscope. The tip was growing, so it needed more cells, and the cells were reproducing. You could see the chromosomes in the cells during the cell reproduction. The chromosomes in the cells looked different, because they were at different stages. Some looked like they had dots in them, while others looked like worms. By understanding the functions of cells, we can better understand how cells work.

Sunday, January 11, 2009

Science Class- Jan. 5-9

This week, we continued to learn about different processes going on in a cell. We discussed cellular respiration, photo synthesis, and fermentation, and took notes. On Thursday, we went on some websites and learned about the energy pyramid. We also learned about some other things, like the energy pyramid.
Cellular respiration is when the cells get energy from glucose (C6H12O6). This process takes place in the mitochondria. The mitochondria starts with the glucose and oxygen as the reactants, and ends up with energy, water, and CO2 as the products.

Fermentation is the process where energy is gotten from the glucose without the oxygen. This process occurs in the mitochondria. An example of this is in the muscles at the end of an exercise. Your muscle cells hurt because some kind of acid is produced from fermentation.

Photo synthesis is when glucose (C6H12O6) is produced. Photo synthesis takes place in the Chloroplast, and only in a plant cell. The reactants are water, CO2, and the sun's energy. The Products are glucose and oxygen.
glucose scientific equation: light + 6(CO2) + 6(H2O) -> C6H12O6 + 6(O)
Transcription is when the DNA's gene sequence is copied into the messenger RNA. This happens in the nucleus.

Translation is when the mRNA is read by the ribosomes, and it is translated into the amino acid sequence of protein.

http://learn.genetics.utah.edu/content/begin/dna/transcribe/ has a good simulation of transcription, and has a good summary of transcription and translation.

http://www.wisc-online.com/objects/index_tj.asp?objID=AP1302 has very detailed steps of everything that goes on during transcription and translation.