Sunday, December 6, 2009

Nov. 30- Dec. 4

Tuesday was the kinematics test, and on Monday we did a scavenger hunt review thing. Then, on Wednesday, we started the new unit on dynamics. A person held a basketball out in one hand and a bowling ball in the other. The two forces acting upon each ball is the force of the earth (like gravity) and the force of the person's hand. We decided that if the two were equal, the object wouldn't move, and if they weren't equal, it would be moving. For example, if the for of the earth was greater than the force of the hand, then the ball would be getting lower, and if the force of the hand was greater, the ball would be getting higher.
Then we started using force diagrams to model things instead of always having to draw pictures. In the diagram, the object the force was being exerted upon is represented by a dot, and the dot is labeled for what it is. We had arrows coming off of them from the top and bottom and side to side to represent force. Those were labeled for what the force came from and how much force in Newtons it was. The arrows opposite each other have opposite signs, so one arrow would say -__N while the other said +__N. Arrows could be stacked if there are two different forces, such as two people holding something. A number sentence for force would look like __N+__N=__N. If the total force is equal to zero, then the object isn't moving. Other objects could also be pushing and object. For example, a table would be pushing up on the ball while the earth is pushing it down.

We learned this stuff by holding bowling balls and pushing cars. This is useful because now we can figure out how much the push up or down or left or right on an object to get it to move a certain way.

Sunday, November 22, 2009

Nov. 16-20

This week, we continued learning about kinematics. Most of the stuff we've been doing is from the kinematics module workbook kind of thing. We started learning about acceleration. We learned that even though the velocity may not be constant, the rate of acceleration can. Acceleration is represented by the slope in a time/ velocity graph. We also di the lesson before that. These are helpful because we can find the positions, times, velocities, and accelerations of more situations.

Wednesday, November 4, 2009

Nov. 2-4

We sratred by doing a lab about how speed looks on a graph. We measured how far both a fast car and a slow car go every second for four seconds. When we graphed the data, the faster car had the steeper trend line. This is important because we know that the faster objects have the steeper trend lines.

We also learned about how to find either the speed, position, or time if we have the other two. To find the speed, we would use the formula x/t= s. To find the position we would use ts= x. To find the time we would use x/s= t. This is important because we can find the speed, time, or position.

Friday, October 30, 2009

Oct. 26-30

On monday, we got into a dicussion about whether or not objects can stop without slowing down. For homework, we watched a video, and it showed bullets in slow motion hitting a piece of bullet proof metal. With the slow motion, we were able to see that the bullet did slow down before coming to a complete stop. The front of the bullet would get smooshed when it hit the surface, and while it was getting smooshed, it slowed down. This shows that objects do slow down before they stop. This would be good to know if you were driving a car because you would know to slow down down before you reach a stop sign.

We were also looking at how different motions look on a graph with time on the x-axis and position on the y-axis. If something was a constant speed, the trend line would be straight. If the speed was increasing, the line would be curving, and it would become more vertical. If the speed was decreasing, the linewould also be curved, but it would be getting more horizontal. The graph could also show objects going in a negative direction/postion (backwards). Those graphs would have the trend lines going down. Knowing about the types of graphs is important because we use them to show the motions of the objects.

On Friday, we played around with some motion sensor kind of thing that sent out waves and made a graph of it. When the line increased, it meant that we were getting farther away, and when it decreased it meant that we were getting closer. Once we understood how it worked, we tried to make graphs that looked a certain way. This is important because now we know how to get away from Batzilla.

Sunday, October 25, 2009

Oct. 19- 23

On Monday we started the new unit. It has to do with movement. We made some little tube kind of things out of paper and had to look at a ball through it. We knew when the ball was moving because we had to change the orientation of the tube, and because the ball would appear to et bigger or smaller. If we don't have to change the orientation of the tube to see the object, we don't see it as moving. An unmoving observer who was still would see a still object as unmoving. A moving observer might see a moving object as unmoving, but they would have to be moving in the same direction at the same speed. Different observers see motion differently. This is important because we are always seeing objects move or not move.

On Tuesday, we dissected cow eyes. The outsides were covered in skin and fat, and they were really hard to cut. First, we had to cut the cornea so that the realy disgusting liquids inside the eye could come out. Then we had the cut the cornea out of the eye. After that we cut the eye in half. The lens came out of the eye, and it felt really hard like a marble. This i important because now we know some of the parts of the eye, and we also know that cow eyes are disgusting and hard to cut open.

When there is movement, time has to pass. That is why we cannot tell in pictures if something is moving. We should specify direction when e are talking about motion. Our lefts and rights can be different from someone else's depending on which direction we are facing, but North, South, East, and West are the same for everyone. This is important because people can see the direction of motion differently.

Sunday, October 18, 2009

Oct. 12-16

I think we started the week by learning about light and how we see colors. We had to answer the question "What occurs when light hits a surface?" The correct answer is that it sometimes reflects, sometimes refracts, and sometimes it is absorbed. We started talking about color, and said that white light is all colors, while black is none. Ex. of how we see colors: White light hits a green object, and the green light is reflected off while the other colors are absorbed. The color that the object is gets reflected off, so we see that color, and all the other colors are absorbed into the object. This is very important because colors are used every day, and it is important that we see them.

For homework, we each had to make a rubric to score ray diagrams, and the next day we used them to rate ray diagrams that people made. The highest number of points I had for each category was 3. For the first one, I gave it 0 for the direction of arrows because it didn't have and arrow points, 3 for neatness, and 2 for accuracy because it should have shown more rays. The second I gave perfect. The third I gave 2 for direction of arrows because the arrows were all going in the same direction, I gave it 3 for neatness, and I gave it 2 for accuracy because the rays were not going everywhere they were supposed to. For the fourth, I gave it 0 because the rays had no arrow points, 2 because it was somewhat messy, and 1 because the rays were curvy. We decided that all ray/wave diagrams should: have the waves be perpendicular to rays; have spacing of waves equal to speed; have arrow points on rays; have rays and waves show the direction; have objects labeled; have waves and rays following the law of reflection; and have waves refracting correctly. This is important because we would most likely get points taken off our tests or quizzes if our ray or wave diagrams are not correct.

Then for homework we watched a short video about a high density slinky and a low density slinky connected that had a wave go through it. My hypothesis before I watched it was that if a wave travels from the high d slinky to the low d slinky, then the wave should start slow and small then get bigger and faster when it gets to the less dense section, and vice versa. That is exactly what happened. The waves through a slinky is like waves going through different mediums with different densities. This is important because waves react differently when they go through different densities.

Then, another time, we stared talking about how we could not see all types of waves. The only type we can see is visible light. Other types of waves are ultra violet, infrared, microwaves, x-rays, and gamma rays. These are important because we use these waves daily. Visible light is used to see, microwaves are used in a microwave, infrared rays are use in a tv remote, and x-rays are used in x-rays at the hospital.

Then we stared talking about prisms. We don't see a rainbow when we shine a laser in the prism because that light is only red. But when we shine white light we can see a rainbow because the colors refract at different angles, and they separate. we also learned that light can reflect inside too, so when we shone the laser at the prism, it went everywhere.

On Friday, my class had to take the unit test on light.

Sunday, October 11, 2009

Oct. 5-9

This week we continued learning about refraction, and we also learned about two models for light. One model says that light is particles, and the other says that light is waves. The waves theory was from Huygen, it says that waves go through 'luminiferous ether', it is like ripples in water, and it explains shadows well. Newton came up with the particles theory, it says that light is 'corpuscles', it is like bouncy balls off a wall, and it explains colors and rainbows. They could both explain reflection. It is important to understand both theories because certain theories could explain certain situations.

For homework one night, we watched a little clip and had to decide if it supported the theory of light refracting and the slope being less steep. After a lot of talking, we decided that waves represent refraction better. We also figured out that light waves a perpendicular to rays. The is also a line perpendicular to the surface of whatever the light is refracting through called the 'normal line'. When light refracts into a denser material, the light bends towards the normal line, and when it refracts into a less dense material, the light bends away from the normal line. This is important because now we can determine where the light will refract.