Sunday, October 4, 2009

Sept. 28- Oct. 2

On Monday, we finished the testing that we started on Friday. The experiment from Friday was the reflectivity test, and we shined the lasers on the objects we were testing and observed how well the laser was reflected. My prediction was that none of the objects would reflect as well as the mirror. The objects I tested were a notebook cover, water, the dry erase board, and a mirror. When I reflected the laser off the notebook cover, the dot on the cardboard was big and dull. When I tested the dry erase board, the dot was smaller and less dull than with the notebook. When we tried to test water, it didn't reflect, the laser just passed through it. The mirror had the smallest and brightest dot out of them all. The conclusions we made were these: surfaces did vary in reflectiveness; "shiny" surfaces are more reflective; light passes through and is reflected off of glass; light spreads out on rough surfaces; and white reflects more while black absorbs more.

The experiment we had to finish on Monday had to do with light rays from the laser all going in the same direction and staying like that when they reflected off the mirror. The test was this: shine the laser at a mirror and clap erasers so that we could see the beam. My prediction was that the laser beams will be reflected in a straight line, and we would be able to see it with the erasers. When we did the test we observed that the beam looked like it did when we just shined it normally. Our conclusion was that the beams do go in a straight line when it hits the mirror.

After we discussed that experiment, we started talking about the angles at which the laser hits and reflects off of the mirror. The hypothesis was that the angle at which the laser hits the mirror will be the same as the angle at which the laser bounces off the mirror. The test was that we would hold up a clear plastic protractor vertical on the mirror and shine the laser through it at the measurements we were testing. The laser bounced back through the protractor and we could see what angle the laser was at. The IV was the angle at which the laser hit the mirror, or the angle of incidence, and the DV was the angle at which the laser reflects off the mirror, or the angle of reflection.

One night for homework, we had to make an analogy about light. Mine were these:Laser is to mirror as bouncy ball is the wall, and light is to wall as lots of really tiny bouncy balls are to wall. Then we started talking about the particle model of light. The model says that light rays are actually particles. So far, we've figured out that the particles are really fast, they scatter on rough surfaces, the particles travel in a straight line, and the light particle are called photons. We also started talking about the photons and water, but I don't really get yet, so I'll write about next week when I understand it better.

Monday, September 28, 2009

Sept. 21-25

On Monday, we finished the discussion about rays and one particular point on the light bulb. One hypothesis was that there is one ray on the point, and it just goes in some random direction. Another was that there are a million rays, and the direction they go in is only to a certain degree. The last hypothesis was that there are infinite rays and they go in all directions. I agrred with the last hypothesis. My H-D statement is this: If the rays are infinite and go in all directions, and we put a piece of cardboard with a hole over it, then there should not be any particular area of light that is brighter. We did the experiment , and my prediction matched the actual outcome, so that means that light goes everywhere and the last hypothesis was true. This is important because it will help us understand the other concepts.

At the end of class on Monday,we saw a piece of cardboard with a hole held next to a lit candle. There was a light from the flame on the wall, but it was upside down. (We were able to tell because of the flickering.) For homework, we had to try to come up with hypotheses to explain this. We went over them the next day, and after disproving almost all of them, we were left with one: the light from the bottom went through the hole, but only some of the rays could go through, and they went up on a diagonal, and ended up higher on the wall/object; in the middle, the light could just go straight through the whole, and ended up in the middle on the wall; at the top of the flame, the light had to go diagonal down to get to the hole, and kept going in a diagonal until it got to the wall, where it ended up below the hole. That night for homework, using this new knowledge, we had to explain how a camera worked. This is useful because now we understand how things like a camera and an eye work.

On Wednesday, we started doing some stuff with mirrors and lasers. My hypothesis from before we stared playing with the mirrors and lasers is that the light from the laser will reflect off the mirror. (I know it's not very detailed.) What happened was the laser did reflect off the mirror, but not like it reflects off the wall and other objects. Also, the dot on the mirror was not as bright to everyone as the dot on the wall. The hypotheses that we came up with to explain this were these: 1). The light from the laser is going in a very specific direction, unlike other lights, and when it reflects off the mirror, the rays continues to go in a straight line, and not just anywhere. And if it goes in a specific direction, it does mean it goes directly into your eye like other laser light rays that reflect off the wall and go everywhere. 2). Certain surfaces have different levels of reflectivity, and some will scatter the laser rays more than others. (End of hypotheses.) For homework, and also on Thursday, we designed experiments to test these. The test for reflectiveness was this: Shine a laser on the object being tested and see if it will reflect a dot onto a piece of cardboard. Then we compare the dots that were reflected onto the cardboard from all the objects and judge which were brighter, ect. We also had an experiment for the 'rays off the mirror in one general direction' hypothesis, but I forgot to write it down, and I can't remember it. We did the experiments on Friday. I only got to do the reflectiveness experiment. We're getting a little time to finish up the experiments on Tuesday (NO SCHOOL ON MONDAY!!!!! =D), so I'll just go over both experiments next week. This topic of mirrors and lasers may be useful if you need to reflect a laser around corners or in another direction.

Sunday, September 20, 2009

Science: Sept. 14-18

This week, we started learning about light.  On monday we were just finishing up with the nature of science stuff (I think), and we started Tuesday by brainstorming thing we know about light.  There were two different hypotheses that we came up with.  They were:  (A)"If we were in a room with no light, we would not be able to see anything," and (B)"If there were no light, our eyes would adjust after a while."  I agreed with the first one.  We set up a test in which we would go under a desk, where there was no light, and see if we could read a sign.  We tested that on Wednesday, and these are my observations:  I could not see/ read anything.  So the conclusion hat we came up with is that you cannot see if there is no light.  The first hypothesis was correct.  This is good to know because it will be easier to understand the rest of what we do with light,  and we will know not to go anywhere with absolutely no light because we will not be able to see.   

On Tuesday, we also talked about the laser pointers.  All that we saw when we pushed the button was the light on the wall.  So, we all made hypotheses about how the dot got there.  I'm pretty sure that most people knew that it followed a path that went straight out to the wall.  My hypothesis was that there was an invisible path that went in a straight line, and the light only showed up on solid objects.  The test was that we would we would try to see the path by shining the laser through flour and other stuff.  I tried shining it through flour, water, and glass.  My observations: I could see the path through the flour, I could see where it passed through the glass, and I could see the path through water droplets splattering out of the sink.  My conclusion is that there is a path and you could see it through flour, water. and glass.  My H-D statement:  If the laser pointer does have a straight path to the dot, and we shine it through flour, glass, and water, then we should be able to see the path.  And my prediction matched my observations.  Other than helping us understand the rest of the light stuff, I think this would help if we were trying to break into a place that had the invisible laser path security things.

On Thursday and Friday, we discussed light reflecting off of objects.  We took a few minutes to do some experimenting with light bulbs and we made pictures.  My picture is of a light bulb with arrows coming off it in all directions.  The arrows represent beams or rays of light.  Some of the rays went off in all random directions, and a few hit a pencil.  Then I had some rays coming off the pencil in the area that the pencil had arrows going to it.  (Maybe if I'm bored, I'll make a picture and put it on here. Maybe.)  My notes I made on that were this: some beams bounce off the pencil and some continue to other places; the pencil blocks some of the beams and they don't go past it; beams reflect off objects.  I guess this let's people know stuff, like go in shade to stay cool because the sun's rays are being blocked and can't reach the shade.  I would kinda hope that people already know this.

Then we discussed how we see.  We had some hypotheses on the board that we would disprove.  My hypothesis/ picture thing was this:  A light bulb with beams going in all directions; some beams hit a marker and are reflected off that in all directions; some of those beams go into the peoples' eye; the image goes to the brain and the person sees the marker.  this hypothesis was right. This is an important idea because we are always seeing things but not thinking about it, and now we know how/why. 

We also began to discuss something else.  We had a picture of a light bulb, and three different things drawn on there.  Picture A had a speck on the bulb with a single ray.  Picture B was supposed to have a million rays, spanning out a little, but not so much.  Picture C was supposed to have infinite rays going in all directions, and some of the rays reflecting off a solid object and not getting past it.  I like picture C.  I don't think we finished talking about that, so there's nothing else I can say about it.  
  

Monday, June 8, 2009

Jun 1-5

On Monday we had a study hall.  Then, on Tuesday we read something on the computar and did some activities.  We went over that in class on Wednesday, and also did some experiments.  One was a glass tube thing filled with a little water with a cork on be heated over the bunsen burner. The cork shot off of it.  The other was a little water in a water bottle with smoke in it that made a cloud.  We discussed these experiments on Thursday.  On Friday, most people weren't in school because of a trip to Dorney Park, so we just melted and bent some glass tubes in the bunsen burners.

Monday, June 1, 2009

May 25-29

Monday was Memorial Day, so we didn't have school. On tuesday, we swithed the groups. I went to documentary. The website is called "Becoming Human", and it just had some videos and exhibits all about hominids and the ancient human/monkey common ancestor. We also did this on Wednesday.

I think that on Thursday we went over the answers for the classification homework from when we were in the classification group. This may have been on Friday because I usually mix up days, but I think it was Thursday. This is pretty much what we learned for the homework:

Carplus Lineaus was a Swedish botanist and physician. He attempted to give every known species a 2-part Latin name. Binomial nomenclature is the system he created. This is used to give each species a name. The first part of the name is the genus, and the second part is the species.

7 classifactions from largest to smallest: kingdom, phylum, class, order, family, genus, species (King Philip Came Over For Good Spagetti)

What kingdom, phylum, class... do you belong: animalia, chordata, mammalia, primate, hominidae, homo, sapien

Human scientific name: Homo sapien

On Friday, we learned about the food chain. The food chain is the flow of energy through an organism. A food web is the flow of energy through a community. These are the symbiotic relationships: Parasitic is when the organism is gaining but the host is losing. Mutualistic is when both host and organism are gaining. Commensalistic is when the host is unaffected and the organism is gaining.

That is what we did this week.

Monday, May 25, 2009

May 18-22

Lamark was one of the people who had a theory about evolution.  They are called the Lamarkian Theory of use and disuse and the Theory of the inheritance of acquired characteristics.  The theory of use and disuse is this: if you were to work at something, you can actually change a trait.  Also, if you don't use something, you will lose it.  This is the theory of inheritance of the acquired characteristics: The above traits will be passed down if both parents have the traits.  Neither of these theories are actually true.

We also started learning about the common ancestor for humans and monkeys.  The oldest one found was Lucy, found in Ethiopia and about 3-4 million years old.  Hominid is a class that includes humans, monkeys, and those ancestors.  The early hominids were the common ancestors for humans and monkeys.  They stand on to feet, and are omnivorous mammal primates.  

The split into 2 groups.  One watched some documentaries on the computer, and some, like me, did some work about classifications. 

Monday, May 18, 2009

Science Class- May 11-15

This week we learned about population, how iguanas on the Galapogas Islands adapted, and different ways for organisms to adapt.

Population-
Population is dynamic (ever changing), not static (never changing). Population is controled by predators and resources. Maximum capacity limit is the limit that an environment can support a population in terms of resources. Fringe speces is a species that lives in open fields around forest.

Iguanas-
We first looked at the regular green iguana, and looked for adaptations that it might have. Then we did the same thing with the yellow and the red iguanas from the Galapogas Islands. They had homologous structures, or similar structures. Therefore they must come from common ancestors and they both adapted into new species.

Processes of evolution-
-mutation: a random change in DNA
-Natural selection: a change in response to the environment
-selective breeding: forced breeding to get desired traits
-genetic engineering: forced change in DNA
-gene flow
-genetic drift